EL195DF070XE48B , 95% AFUE, Downflow, Gas Furnace, Constant Torque, 70,000 Btuh, Elite Series

Elite® Series

EL195E Gas Furnace

Single-stage furnace with Power Saver™ technology

The EL195DF070XE48B's Power Saver™ Constant Torque motor is up to 33% more efficient than standard single-stage motors and up to 200% more efficient in constant fan mode.

Downflow

Energy Efficiency

• Efficiency rating of 95% AFUE— can save your customers hundreds of dollars each year*, compared to standard furnaces
• Power Saver™ motor operates at constant torque to help maintain consistent air flow
• Power Saver™ technology not only provides energy boost capabilities improving the overall system efficiency, similar to a variable speed furnace, but also delivers higher SEER ratings in cooling mode. In continuous fan mode, this technology helps keep energy waste at a minimum
• Sealed blower compartment—minimizes losses and maximizes efficiency and comfort. Less than 1% leakage at 1.0" ESP
• Dual-fuel capability—can be combined with an electric heat pump to enhance comfort and fuel efficiency by alternating between electric and gas heat, optimizing energy use and minimizing heating costs

Quiet Operation

• Fully insulated cabinet—ensures quiet, efficient operation
• Secondary heat exchanger—allows the furnace to achieve high efficiency levels by capturing additional heat

Home Comfort

• Low-speed fan—provides a consistent, continuous flow of warm air
• Secondary heat exchanger—allows the furnace to achieve high efficiency levels by capturing additional heat

Reliable Performance

• Duralok Plus™ heat exchanger—made of patented ArmorTuf™ steel to ensure high reliability and efficiency
• SureLight® igniter—silicone nitride construction ensures long product life and reliable operation
• SureLight® control board—direct-readout diagnostics allow simple, quick troubleshooting

*Criteria used in this example are 2,000 full-load heating hours, with a 60,000 Btuh heating design load and $1.368 ccf for gas. Actual savings may vary, depending on local weather patterns, local fuel rates and lifestyle.

California Only

This furnace does not meet the South Coast Air Quality Management District (SCAQMD) Rule 1111 NOx emission limit (14 ng/J) and cannot be installed in the SCAQMD.  

If installed in San Joaquin Valley Air Pollution Control District (SJVAPCD) only: This furnace does not meet the SJVAPCD Rule 4905 NOx emission limit (14 ng/J), and thus is subject to a mitigation fee of up to $450.