Lennox 624623-08, ECM Constant Torque Blower Motor, Pre-Programmed, 3/4 HP, 115 VAC 1 Ph 60 Hz, 0-1100 RPM

Cat # : 23V78

Model/Part # : 624623-08

This product is used in several different models.

Print

Quantity:

Save to List

Brand
Lennox
Catalog Number
23V78
Model/Part Number
624623-08
Minimum Order Quantity
0.0
Base Unit of Measure
Unit(S)
EAN / UPC
66255157330
Gross Weight
12 LB
Motor Type
ECM - Programmed
RPM
0-1100 RPM
Motor HP
3/4 HP
Number of Speeds
5 Speed
Frame Size
48
Motor Mounting Position
Horizontal
Motor Mounting Type
Belly Band
Motor Voltage
115 VAC 1 Ph 60 Hz
Shaft Size
1/2 x 3.92 IN
Rotation
CCWLE
Bearing Type
Ball

Product Overview

Endura Pro Constant Torque motors are no longer being produced by the vendor and are being replaced by Ensite motors. Because Endura Pro motors are no longer longer available the replacement kits will contain Ensite motors with an adapter harness to convert back to the Endura Pro connections.

Programmed Ensite Motor Include:

  • Ensite Motor
  • Ensite to Endura Pro Adapter Harness (107246-01)
  • Installation Instructions (508282-01)
  • Zip Ties (2)

Note:

  • Endura Pro motors have a large 9 pin connector on the motor
  • Ensite motors have 2 separate smaller connectors on the motor, 3 pin for the power and 6 pin for the low voltage speed taps 
  • If the existing motor is an Endura Pro then you must use the Ensite to Endura Pro Adapter Harness (107246-01)
  • If the existing motor is a Ensite the you do not need the adapter harness