ADP PL60H210P30, Plenum Coil, 60 Unit Size, 3.0 - 5.0 Tons, P29 Slab Number

Cat # : 16C69

Model/Part # : PL60H210P30

Quantity:

Save to List


Brand
ADP
Catalog Number
16C69
Model/Part Number
PL60H210P30
Minimum Order Quantity
0.0
Base Unit of Measure
Unit(S)
Family
PL
Series
PL
Configuration
Horizontal
Nominal Cooling Capacity
5 Ton
Metering Device
TXV
Cased
Cased
Type
Cased Evaporator Coil
Color
Galvanized
Gross Weight
60 Lbs.
Suction Line OD
7/8 Inch
Liquid Line OD
3/8 Inch

Product Overview

Product Features:

•  One-piece cabinet construction for improved strength and rigidity.

• Top panel with only 4 screws for fast and easy coil access.

• UV light knockouts to easily locate and install UV lights.

• “Easy-lift” handle allows easy lifting through tight spaces.

• Furnace mounting bracket included for single person installation.

• Independently certified < 2% air leakage per ASHRAE test standard.

• Non-captive panels allow access to inside of cabinet without the need to cut refrigerant lines.

• Heavy gauge cabinets are lined with foil faced insulation— 5/8" on metal panels and 1" duct board on plenum

openings.

• Rubber grommet around suction line and dedicated condensate cutouts for reduced air leakage.

• Dual 3/4" FPT condensate drains on front and back of coil allow flexibility to accommodate left or right airflow

furnaces.

• Refrigerant connections are 3/8" ODF liquid and 7/8" ODF suction.

• Refrigerant connections in center of coil away from airflow path.

• Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs and then charged with

dry air.

• Threaded expansion valves available factory installed or as a field installed kit.

• Top refrigerant connections for installation flexibility.

• TXV access port standard on piston models.

• Light weight aluminum coil with aluminum header plates.

• High efficiency lanced fin design.

• Microban® antimicrobial additive to inhibit the growth of mold and

mildew in the drain pan.

• Patented HydroTEC™ “V” drain pan for improved drainage.

• UV resistant drain pans are molded of high temperature polymer (450° F).

• Secondary drain pan included standard on all models.

• Secondary drain pan locator embossments for easy installation.