Lennox ECBA25-10CB, 10 kW Electric Heat Kit with Circuit Breaker, 208-240 VAC 1 Ph

Cat # : 16Y42

Model/Part # : ECBA25-10CB


Save to List

Catalog Number
Model/Part Number
Minimum Order Quantity
Base Unit of Measure
Product Depth
21.18 IN
Product Height
6.5 IN
Product Width
11.38 IN
Product Voltage
208/230v 1ph 60 hz
Electric Heat Section
Gross Weight
4.5 LB
Heating Capacity
10.0 kW
Electric Heat Kit with Circuit Breaker
Product Voltage
208-230 VAC 1 Ph
Heating Capacity
10 kW
Additional Information
60 Amp Circuit Beaker
For Use With
CBA25UH Series Air Handlers
Electric Heat Kit with Terminal Block

Product Overview

Lennox ECBA25 Electric Heat Kits

  • ETL listed
  • Field install internal to unit cabinet
  • Available in several voltages and kW sizes, see specific Air Handler Tables
  • Helix wound nichrome heating elements exposed directly in air stream resulting in instant heat transfer, low element temperatures and long service life
  • Each element equipped with accurately located limit control with fixed temperature off setting and automatic reset
  • Supplemental thermal cutoff limit control, provides positive protection in case of excessive temperatures
  • Thermal sequencer relay brings elements on and off line, in sequence and equal increments, with time delay between each
  • Initiates and terminates blower operation
  • Heating control relay(s) furnished as standard
  • Control box and access cover constructed of heavy gauge galvanized steel
  • Factory assembled with controls installed and wired
  • Electric heat low voltage controls plug-in to air handler

Circuit Breaker (CB) Models

  • All “CB” model heaters are equipped with circuit breakers for overload and short circuit protection
  • Factory wired and mounted on electric heat unit
  • Current sensitive and temperature actuated
  • Manual reset
  • Circuit breakers qualify as disconnect means at unit in many areas, eliminate the need for field provided disconnect
  • Consult local electrical code in your area