Lennox Elite EL296E, EL296DF110XE60C, 96% AFUE, 110000 BTU, 5 Ton, 2 Stage Heat, Constant Torque Downflow Gas Furnace

Cat # : 96W34

Model/Part # : EL296DF110XE60C

Quantity:

Save to List


Brand
Lennox
Catalog Number
96W34
Model/Part Number
EL296DF110XE60C
Minimum Order Quantity
0.0
Base Unit of Measure
Unit(S)
Family
EL296E
Series
Elite
Heating Capacity
110000 Btuh
Heating Efficiency
96% AFUE
Configuration
Downflow
Blower Size
5 Ton
Gas Stages
2 Stage Heat
Blower Type
Constant Torque
Product Voltage
115 VAC 1 Ph 60 Hz
Product Depth
27.75 Inch
Product Width
21 Inch
Product Height
33 Inch
Gross Weight
174 lbs.
Energy Star Certified
Yes
Low Nox
Low NOx

California Only

Approved by the California Energy Commission and meets California Nitrogen Oxides Standard (NOx) limits of 40 ng/J.

This furnace does not meet the South Coast Air Quality Management District (SCAQMD) Rule 1111 and San Joaquin Valley Air Pollution Control District (SJVAPCD) Rule 4905 NOx emission limit (14 ng/J) and cannot be installed within the SCAQMD and SJVAPCD areas.

Product Overview

Elite® Series

EL296E High-Efficiency, Two-Stage Gas Furnace

Two-stage furnace with Power Saver™ technology

The EL296DF110XE60C's Power Saver™ Constant Torque motor is up to 33% more efficient than standard single-stage motors and up to 200% more efficient in constant fan mode.

Downflow

Energy Efficiency

  • Efficiency rating of up to 96% AFUE—can save your customers hundreds of dollars each year*, compared to standard furnaces
  • ENERGY STAR® qualified—meets or exceeds EPA guidelines for energy efficiency
  • Power Saver™ motor operates at constant torque to help maintain consistent air flow
  • Power Saver™ technology not only provides energy boost capabilities improving the overall system efficiency, similar to a variable speed furnace, but also delivers higher SEER ratings in cooling mode. In continuous fan mode, this technology helps keep energy waste at a minimum
  • Two-Stage Gas Valve operates at a lower heating output for efficiency, switching to a higher output as needed
  • Dual-fuel capability—can be combined with an electric heat pump to enhance comfort and fuel efficiency by alternating between electric and gas heat, optimizing energy use and minimizing heating costs

Quiet Operation

  • Special sound-absorbing insulation—further reduces sound for quiet operation

Reliable Performance

  • High Quality Steel
  • SureLight® igniter—silicone nitride construction ensures long product life and reliable operation
  • SureLight control board—controls furnace operation to ensure high reliability and efficiency
  • Multi-position models available

*Criteria used in this example are 2,000 full-load heating hours, with a 60,000 Btuh heating design load and $1.368 ccf for gas. Actual savings may vary, depending on weather patterns in the local area, local fuel rates and individual lifestyle.