Lennox LRP16GX48-108VP, 4 Ton, 208-230v 1ph 60 hz Low NOx Gas/Electric Residential Packaged Unit

Cat # : 21K46

Model/Part # : LRP16GX48-108VP

Quantity:

Save to List


Brand
Lennox
Catalog Number
21K46
Model/Part Number
LRP16GX48-108VP
Minimum Order Quantity
0.0
Base Unit of Measure
Unit(S)
EAN / UPC
66255155232
Family
LRP16GX
Cooling Capacity
4 Ton
Product Voltage
208-230v 1ph 60 hz
Product Depth
47.625 Inch
Product Width
56.125 Inch
Product Height
44.875 Inch
Gross Weight
541 lbs.
Heating Capacity
108000 Btu
Cooling Stages
Multi-Stage
Unit Blower Type
Variable Speed Direct Drive - ECM
Type
Low NOx Gas/Electric Residential Packaged Unit
SEER IEER EER
16.00 SEER 12.0 EER
SEER2 IEER2 EER2
15.2 SEER2 11.5 EER2

Product Overview

LRP16GX Low NOx Packaged Gas Electric Unit 16 SEER

Approvals

  • LRP16GX models are approved by the California Energy Commission and meet California Nitrogen Oxides Standard (NOx) limits of 40 ng/J

Heat Exchanger

  • Aluminized tubular steel for superior resistance to corrosion and oxidation
  • Round surfaces create minimum air resistance and allow air to surround all surfaces for excellent heat transfer
  • Compact design reduces space requirements in cabinet
  • Laboratory life cycle tested

Inshot Burners

  • Aluminized steel inshot burners provide efficient trouble free operation
  • Burner venturi mixes air and gas in correct proportion for proper combustion
  • Burner assembly is removable from the unit as a single component for ease of service
  • Each burner may be removed individually

Two-Stage Gas Control Valve

  • 24 volt redundant combination two-stage gas control valve combines manual shut off valve (On-Off), automatic electric valve (dual) and gas pressure regulation into a compact combination control

Two-Stage Combustion Air Inducer

  • Heavy duty combustion air inducer prepurges heat exchanger and safely vents flue products
  • Blower is controlled by the ignition control board
  • Pressure switch proves blower operation before allowing gas valve to open
  • Combustion air inducer operates during heating cycle
  • Inducer operates for the first 10 seconds of every cooling cycle to prevent insects from nesting in the flue outlet during cooling season

Limit Control

  • Factory installed on heating vestibule panel
  • Automatic reset

Flame Rollout Switch

  • Factory installed on burner box
  • Provides protection from abnormal operating conditions
  • Manual reset

Ignition Control Board

  • Ignition control board with LED diagnostics

R-410A Refrigerant

  • Non-chlorine based
  • Ozone-friendly
  • Factory pre-charged

Evaporator and Condenser Coils

  • Copper tube with aluminum fin coils

Anti-Microbial Condensate Drain Pan

  • Anti-Microbial additive resists growth of mold and mildew on drain pan which improves indoor air quality and reduces drain line blockage
  • Drain pan overflow switch monitors condensate level in drain pan and shuts down unit if drain becomes clogged
  • Fully insulated to reduce condensation

Outdoor Coil Fan

  • Weather protected heavy duty condenser fan motor
  • Coated steel fan blades for long life
  • Corrosion-resistant coated steel fan guard
  • Internally mounted
  • Totally enclosed fan motor

High Pressure Switch

  • Protects the system from high pressure conditions
  • Automatic reset.

Loss of Charge Switch

  • Shuts off unit if suction pressure falls below setting
  • Loss of charge and freeze-up protection

Compressor

  • Two-Stage Scroll Compressor
  • High volumetric efficiency
  • Uniform suction flow
  • Constant discharge flow
  • Quiet operation