System Sensor RTS2-AOS, Multi-Signaling Accessory with Strobe, 20-29 VDC,

Cat # : Y3027

Model/Part # : RTS2-AOS

Quantity:

Save to List


Brand
System Sensor
Catalog Number
Y3027
Model/Part Number
RTS2-AOS
Minimum Order Quantity
0.0
Base Unit of Measure
Unit(S)
EAN / UPC
66255143164
Type
Multi-Signaling Accessory with Strobe
Gross Weight
0.85 LB

Product Overview

The System Sensor RTS2 and RTS2-AOS multi-signaling accessories are designed for use with System Sensor InnovairFlex 4-wire conventional duct smoke detectors only. The accessory has two bicolored LEDs that indicate the sensor status of up to two connected duct smoke detectors. The key switch on the unit can be used to select a connected duct detector sensor (either sensor 1 or sensor 2), and the selected sensor can be tested or both sensors can be reset simultaneously using the test/reset button. LED status indications include: Standby (green blink), Trouble (amber), Maintenance (amber blink) and Alarm (red). 

  • Standby (Green Blink), Trouble (Amber), Maintenance (Amber Blink) and Alarm (Red) LEDs to indicate detector status
  • Keyswitch to select desired sensor, enable test/reset button and sensitivity reading
  • Test/reset button
  • Sensitivity reading ability with SENS-RDR (sold separately)
  • Selectable continuous or temporal tone
  • AOS-Add-On-Strobe (included on RTS2-AOS model)
  • Provisions for single- or double-gang box mounting
  • Ability to discretely monitor two sensors when duct smoke detectors are configured in a 2-to-1 set up (See InnovairFlex duct smoke detector manual for reference.) 

Includes

  • RTS2-AOS Multi-Signaling Accessory
  • Mounting Hardware Kit (Contains (2) sets of mounting screws and (1) tamper resistant outer cover mounting screw.